It seems like a fine question. The makefile performs the following tasks: Optionally, the next boot stage usually the Bootloader can also be stored on the same custom partition. You can generate this file with the command: The output file contains only Preloader or Bootloader images.
Uploader: | Akilabar |
Date Added: | 3 November 2010 |
File Size: | 11.75 Mb |
Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
Downloads: | 93466 |
Price: | Free* [*Free Regsitration Required] |
The compiler leaves an empty space between the bootloader exception vector and the program. For the current version, refer to Table 1. For the first three options, add up integer of 16, so that the HPS cold reset is performed.
The mkpimage tool always places the output image at the start of the output binary file, regardless of the target flash memory type.
Added a "Mentor Code Sourcery Compiler" section. Updated information about the Toolchains The master boot record, located at the first bytes of the device memory, contains partition address and size information. Enabling this feature with CSEL!
STM32/ARM Cortex-M3 HOWTO: Development under Ubuntu (Debian)
The table describes all the command line options; and the figure shows the --help output from the tool. Padding fills the remaining unused regions.
When this option is specified, bsp-create-settings generates the BSP files after the settings file has been created. You're taking the right route with the Lite edition.
This release only supports the default 1. The bsp-create-settings tool creates a new BSP settings file. Sourcerg setting specifies the maximum size used for storing preloader debug information. Display version and exit. These options duplicate the operation data; therefore you do not need embedded software to create a large file containing duplicate images.
L4WD1 Boolean False osurcery. The Trace Buffer tab provides the option of selecting the timestamp frequency. Select the source for the subsequent boot image.
Install Sourcery CodeBench Lite Edition for ARM EABI
Sign Bootloader using key pair file specified. Only "write" action is supported. L3 Firewall region bases.
The capabilities of the HWLIB are expected to evolve litd expand over time particularly as common use case patterns become apparent from practical application in actual systems. Possible error conditions include: In step 1, updated the path for the You must update the hardware handoff files and regenerate the BSP each time a hardware change impacts the HPS, such as after pin multiplexing or pin assignment changes.
This option shows all the BSP settings values. When using this option, the SDRAM controller is not completely re-initialized when coming back from warm reset.
Sourcery CodeBench Lite
Its purpose is to provide a logical interface abstraction and decoupling layer to the physical devices and codevench that comprise the hardware interface of the HPS. For example, 4 MB worth of memory content residing in the flash address, starting at 1 MB, are erased using a cable M. You can view this debugging information by connecting a terminal program to the UART specified peripheral.
The HPS flash programmer determines the type of flash to program by sampling the boot select BSEL pins during cold reset; you do not need to specify the type of flash to program. The U-Boot makefile performs the following tasks: Depending on your role in hardware or software development, you need sorucery different subset of the SoC EDS toolkit.
Комментариев нет:
Отправить комментарий